5
4
Energy Saver Mode
If you press
Energy Saver mode. While in the Energy Saver mode, the temperature of the fixing
unit is lowered, which enables you to conserve electricity.
You can set the energy saving level to -10%, -25%, -50%, or None.
Follow the procedure below to set the Energy Saver Mode.
NOTE
•
If you set the Energy Saver Mode setting to '-10%', '-25%', or '-50%', you will have to wait
for a while before copying or printing is possible once the Energy Saver mode is
deactivated.
•
After deactivating the Energy Saver mode, the machine's recovery time may vary,
depending on the energy saving level setting and the surrounding environment (i.e.,
temperature, humidity, etc.).
•
The default setting is '-10%'.
1
4-40
Specifying Common Settings
Press [Done] repeatedly until the Basic Features screen
appears.
NOTE
The registered paper type information is displayed through the use of icons on the
paper selection screen, as shown below.
(Energy Saver) on the control panel, the machine goes into the
(Additional Functions) © [Common Settings].
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-20.