Standby Display; Energy Saver Mode; Setting The Energy Saver Mode Manually; Restoring From The Energy Saver Mode - Canon iR1510 Reference Manual

Standby Display

The standby display differs depending on whitch mode is selected. The standby display in Copy mode is as follows:
Copy Ratio

Exposure
• When the machine is plugged in, the LCD displays
• The Fax mode standby display appears only with the iR1570F model. (→ Fax Guide)

Energy Saver Mode

This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine
automatically enters the energy saver mode.
• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes. You can also turn off
the energy saver function. (→ p. 7-4)
• The energy saver function does not activate when the machine is in the following status:
– When printing out copies, faxes* or other pages
– When sending or receiving faxes*
– When a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator
lights up*
– When paper jams occur
– When the platen unit is not returned to the original position
– When an error code appears and the Alarm indicator flashes
– When
P R E S S O K K E Y
– When the toner is empty
– When the waste toner is full
* Only for the iR1570F model
n n n n Setting the Energy Saver Mode Manually
1
Press Energy Saver.
• The LCD is turned off and the Energy Saver key lights up.
• Right after the machine is restored from the energy save mode, or right after copying finishes, wait about 5 seconds before pressing
Energy Saver.
n n n n Restoring from the Energy Saver Mode
1
Press Energy Saver.
• The Energy Saver key goes off and the machine enters standby mode.
• The machine can be restored from the energy saver mode immediately. However, it may vary according to room temperature and
circumstance.
1-8
Paper Size
$
7(;7
Image Quality
is displayed

Copy Quantity
for a while, then the standby display appears.
P L E A S E W A I T