Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual page 90

Figure 6-12
To add a device to the list, fill in the following fields:
Access: Select an access level:
Always Block: Always block the device. This setting cannot be overridden.
Always Allow: Always allow access unless the device matches an Always Block filter.
Block: Block access unless the device matches an Always Allow filter.
Allow: Allow access unless the device matches an Always Block or a Block filter.
Default Device Access: Give the device the same access level as Default Device Access if
no other match is found.
Manufacturer: Click the Manufacturer column then type the name of the manufacturer you
want to include in the filter (Canon, for example).
Product: Click the Product column then type the name of the product you want to include in
the filter.
Friendly Name: Click the Friendly Name column then type the friendly name of the device
you want to include in the filter.
Serial Number: Click the Serial Number column then type the serial number of the device you
want to include in the filter.
Comment: Click the Comment column then type the comment you want to include in the filter
(Canon, for example).
You can click the Advanced Columns box to add the following columns: USB Version, Device
Class, Device Sub-Class, Device Protocol, Vendor ID, Product ID, BCD Device, O/S Device ID, and
O/S Device Class.
90 ZENworks Endpoint Security Management Administration Guide
USB Connectivity Advanced page.