Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual page 146

Action.DisplayMessage "40","Message40", "Message Here", "question", ""
Action.Sleep(10000)
Action.DisplayMessageByName "Message40"
Details:
This script will create a Message Box with all parameters and then wait 10 seconds, (during which
the tester should click Ok to end box display) and then it will be displayed by the ID and wait 10
seconds, (again, the tester should click Ok to end box display) and then it will display the Message
Box by
EnableAdapterType
JScript:
Action.EnableAdapterType(false, eWIRELESS);
Action.EnableAdapterType(true, eWIRELESS);
Action.EnableAdapterType(false, eWIRED);
Action.EnableAdapterType(true, eWIRED);
Action.EnableAdapterType(false, eDIALUPCONN);
Action.EnableAdapterType(true, eDIALUPCONN);
VBScript:
Action.EnableAdapterType false, eWIRELESS
Action.EnableAdapterType true, eWIRELESS
Action.EnableAdapterType false, eWIRED
Action.EnableAdapterType true, eWIRED
Action.EnableAdapterType false, eDIALUPCONN
Action.EnableAdapterType true, eDIALUPCONN
Launch
NOTE: The first parameter of the Launch call is a unique integer identifier for each action.
JScript:
Action.Launch("50","C:\calco.exe","");
VBScript:
Action.Launch "51","C:\calco.exe",""
LaunchAsSystem
JScript:
Action.LaunchAsSystem("C:\calco.exe"," sParameters ", "sWorkingDir",true);
VBScript:
Action.LaunchAsSystem "C:\calco.exe"," sParameters"," sWorkingDir",true
LaunchAsUserWithCode
This launches in the user context and returns the exit code of the application launched.
146 ZENworks Endpoint Security Management Administration Guide