Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual page 104

NOTE: If you want to disable CD-ROM drives or floppy drives on a group of endpoints or set them
as Read-Only, the Local Security Settings (passed down through a directory service group policy
object) must have both Devices: Restrict CD-ROM access to locally logged-on user only and
Devices: Restrict floppy access to locally logged-on user only set as Disabled. To verify this, open
either the group policy object, or open Administrative Tools on a machine. Look in Local Security
Settings - Security Options and verify both devices are disabled (see Figure 6-10). Disabled is the
default.
Verify Local Storage Device Options are set as Disabled
Figure 6-20
Wi-Fi Management
Wi-Fi management allows the administrator to create Access Point lists. The wireless access points
entered into these lists determine which access points the endpoint is permitted and not permitted to
connect to within the location, and which access points it's permitted to see in the Microsoft Zero
Configuration Manager (Zero Config). Third-party wireless configuration managers are not
supported with this functionality. If no access points are entered, all access points are available to the
endpoint.
To access this control, click the Locations tab, then click Wi-Fi Management in the policy tree on
the left.
104 ZENworks Endpoint Security Management Administration Guide