Defined Location Settings - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual

To create a hyperlink, perform the following steps (see
the control):
1 Enter a name for the link. This is the name that will display below the message (required for
Advanced VPN hyperlinks as well).
2 Enter the hyperlink
3 Enter any switches or other parameters for the link (use for VPN enforcement)
Custom Message and Hyperlink Controls
Figure 6-40
NOTE: Changing the Message or Hyperlink in a shared component will change in all other
instances of that component. Use the Show Usage command to view all other policies associated
with this component.

6.3.5 Defined Location Settings

Setting the Location Icon
The location icon provides a visual cue to the user which identifies their current location. The
location icon displays on the taskbar in the notification area. Use the pull-down list to view and
select from the available location icons:
Select an icon which will help the end-user easily identify their location at a glance.
Figure 6-40 on page 125
Creating and Distributing Security Policies 125
for an example of