Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual page 100

2 Name the location and provide a description.
3 Define the location settings (see below).
4 Click Save Policy.
To associate an existing location:
1 Click Defined Locations, then click the Associate Component button on the toolbar.
2 Select the desired locations from the list.
3 Edit the settings, if desired.
NOTE: Changing the settings in a shared component will affect all other instances of this same
component. Use the Show Usage command to view all other policies associated with this
component.
4 Click Save Policy.
It is recommended that multiple defined locations (beyond simple Work and Unknown locations) be
defined in the policy to provide users with varying security permissions when they connect outside
the enterprise firewall. Keeping the location names simple (for example, Coffee Shops, Airports,
Home) and providing a visual cue through the location's Taskbar icon, which helps users easily
switch to the appropriate security settings required for each network environment.
Communication Hardware
Communication hardware controls, by location, which hardware types are permitted a connection
within this network environment.
100 ZENworks Endpoint Security Management Administration Guide