Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual page 131

TCP/UDP Ports Settings
Figure 6-43
New TCP/UDP port lists can be defined with individual ports or as a range (1-100) per each line of
the list.
To create a new TCP/UDP port setting:
1 Select TCP/UDP Ports from the components tree and click the Add New button
2 Name the port list and provide a description
3 Select the port behavior from the drop-down list. The optional behaviors are:
Open - All network inbound and outbound traffic is allowed. Because all network traffic
is allowed your computer identity is visible for this port or port range.
Closed - All inbound and outbound network traffic is blocked. Because all network
identification requests are blocked your computer identity is concealed for this port or port
range.
Stateful - All unsolicited inbound network traffic is blocked. All outbound network traffic
is allowed over this port or port range.
4 Enter the transport type:
All (all port types listed below)
Ether
IP
TCP
UDP
Creating and Distributing Security Policies 131