Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 - ADMINISTRATION Administration Manual page 202

By default, all logging events are set to Warning, but you can set each listed event to the following:
Debug: Turns on every possible message and includes Informational, Warning and Error
messages.
Informational: Records all events when they occur, such as when a network connection event
begins and ends.
Warning: Records errors that have occurred but are solvable and do not prevent the client from
running.
Error: Records errors that have occurred and prevent the client from running.
Use the Save as Defaults button to save a particular configuration. The configuration is then saved to
the
C:\users\allusers\novell\ZES\log
Logging. Select Restore Defaults to restore the Logging window to its default state (all events to
Warning if Save as Defaults is not selected), or to the state when you selected Save as Defaults.
When troubleshooting, it is recommended that you set logging according to the directions of Novell
Support and recreate the circumstances that led to the error to see if it can be repeated.
Add Comment
The option to add a comment to the logs is available in the Logging window. Click the Add
Comment button to display the Logging Comment window. Comments are included with the next
batch of logs.
Figure 8-8
202 ZENworks Endpoint Security Management Administration Guide
Comment Window
directory, where it can be used the next time you select