Starting The Console; Adding Edirectory Services - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Installation Manual

7.2 Starting the Console

To launch the Management Console login window, click Start > All Programs > Novell > ESM
Management Console > Management Console.
Log in to the Management Console by entering the administrator name and password. Before you
can enter the username and password, you must be connected to the directory service's domain (see
Section 7.2.1, "Adding eDirectory Services," on page
Management Service domain.
Login to ZENworks Endpoint Security Management Management Console
Figure 7-5

7.2.1 Adding eDirectory Services

The following steps provide information for using Novell eDirectory as the directory service. For
information about using Microsoft Active Directory, see
ZENworks Endpoint Security Management Administration
1 Click the Options button on the login screen to display the Configuration window.
Authenticating Directories
Figure 7-6
2 Enter a friendly name for the Directory Service and select eDirectory from the Service Type
drop-down list.
3 In the Host/DN field, specify the IP address of the eDirectory server and specify the tree name
under the Domain tree.
4 Check Available for User Authentication to display the domain in the login drop-down menu.
49). The username must be a user on the
"Configuring the Directory
Guide.
Performing the Management Console Installation
Service" in the
49