Table of Contents
Advertisement
Example
map m: = \\gwvol1_SERVER\gwvol1
When specifying the map commands you will need, use
for each volume where a domain or post office resides. Use
cluster.
SLP
On NetWare 6.x, Novell Cluster Services automatically propagates virtual server information into
SLP and provides the most reliable name resolution.
On NetWare 5.1, Novell Cluster Services does not propagate virtual server information into SLP by
default. If you want to use SLP for name resolution on NetWare 5.1, you must download the
(unsupported) CVSBIND utility from the Technical Information Document
(http://www.novell.com/support/
search.do?cmd=displayKC&docType=kc&externalId=10062624&sliceId=&dialogID=9016836&st
ateId). Install CVSBIND according to the instructions included with the download, then determine
the server-specific commands you will need to use with CVSBIND.
Syntax:
cvsbind add cluster_volume_SERVER ip_address
cvsbind del cluster_volume_SERVER ip_address
Remember that cluster_volume_SERVER represents the name of the virtual server created when
you cluster-enabled the volume.
Example:
cvsbind add gwcluster_gwvol1_SERVER 172.16.5.81
cvsbind del gwcluster_gwvol1_SERVER 172.16.5.81
Later, in
"Modifying the Volume Resource Load Script for the Agents" on page 53
the Volume Resource Unload Script for the Agents" on page
commands to the load and unload scripts for GroupWise volume resources.
3.2 Setting Up a New GroupWise System in a
Cluster
The GroupWise Installation Advisor walks you through setting up the primary domain and an initial
post office in the primary domain. You might be creating your primary domain and initial post office
on the same GroupWise volume or on two different volumes. After you have created the primary
domain and initial post office and installed the GroupWise agents, you can create additional
secondary domains and post offices as needed.
To set up the primary domain and initial post office for a new GroupWise system in a clustering
environment:
1 If necessary, map a drive to each GroupWise administration volume
Worksheet item
46
GroupWise 7 Interoperability Guide
6).
System Clustering Worksheet item 7 or 8
System Clustering Worksheet item 3
NWCS Bindery Tool
54, you need to add the cvsbind
(System Clustering
for
and
"Modifying
Advertisement
Table of Contents
