Implementing The Internet Agent In A Netware Cluster; Planning The Internet Agent In A Cluster - Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual

Table of Contents

Advertisement

Implementing the Internet Agent in
4
a NetWare Cluster
You should already have set up at least a basic GroupWise
"Planning GroupWise in a NetWare Cluster," on page 23
Post Office in a NetWare Cluster," on page
Worksheet" on page 37
and the
have access to the filled-out worksheets, print the worksheets now and fill in the clustering and
network address information as it currently exists on your system. You need this information as you
implement the Internet Agent in a cluster.
Section 4.1, "Planning the Internet Agent in a Cluster," on page 69
Section 4.2, "Setting Up the Internet Agent in a Cluster," on page 73
Section 4.3, "Managing the Internet Agent in a Cluster," on page 83
Section 4.4, "Internet Agent Clustering Worksheet," on page 84
Section 4.5, "Internet Agent Quick Checklist," on page 86

4.1 Planning the Internet Agent in a Cluster

A main system configuration difference between a GroupWise system in a clustering environment
and a GroupWise system in a regular environment is that you need to create a separate domain to
house each GroupWise gateway, including the Internet Agent.
The
Section 4.4, "Internet Agent Clustering Worksheet," on page 84
need as you set up the Internet Agent in a clustering environment. You should print the worksheet
and fill it out as you complete the tasks listed below:
Section 4.1.1, "Planning a Domain for the Internet Agent," on page 70
Section 4.1.2, "Deciding Whether to Cluster-Enable the Internet Agent Volume," on page 70
Section 4.1.3, "Determining an Appropriate Failover Path for the Internet Agent Volume," on
page 70
Section 4.1.4, "Planning a Secondary IP Address and Cluster-Unique Port Numbers for the
Internet Agent and Its MTA," on page 71
Section 4.1.5, "Preparing Your Firewall for the Internet Agent," on page 71
Section 4.1.6, "Deciding Where to Install the Internet Agent and Its MTA," on page 72
Section 4.1.7, "Deciding Whether to Run the Internet Agent and Its MTA in Protected
Memory," on page 72
Section 4.1.8, "Planning the MTA Installation," on page 73
Section 4.1.9, "Planning the Internet Agent Installation," on page 73
43. As part of this process, the
"IP Address Worksheet" on page 40

Implementing the Internet Agent in a NetWare Cluster

®
system, as described in
and
Chapter 3, "Setting Up a Domain and
"System Clustering
were filled out. If you do not
lists all the information you
4
Chapter 2,
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groupwise 7

Table of Contents