Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual page 359

Item
6) WebAccess Agent
Domain Name:
Domain Directory:
Mount Point:
7) MTA Network Information:
Secondary IP address
Message transfer port
(default 7100)
HTTP port (default 7180)
8) WebAccess Agent
Network Information:
Secondary IP address
HTTP port (default 7211)
Explanation
Specify a unique name for the WebAccess Agent domain. Specify the
directory on the shared storage partition where you want to create the
new domain. Specify the mount point on each node where you plan to
mount the shared storage partition.
For more information, see
WebAccess Agent," on page
Record the MTA network address information that you will need as
you install the MTA.
For more information, see
Installation," on page 190.
Record the WebAccess Agent network address information that you
will need to install the WebAccess Agent.
For more information, see
Agent Installation," on page
Implementing WebAccess in a Heartbeat Cluster 359
Section 16.2.1, "Planning a Domain for the
188.
Section 16.2.5, "Planning the MTA
Section 16.2.6, "Planning the WebAccess
190.