Planning The Mta Installation; Planning The Webaccess Agent Installation; Planning The Webaccess Application Installation; Setting Up The Webaccess Agent In A Linux Cluster - Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual

WEBACCESS AGENT CLUSTERING WORKSHEET
Under Item 4: Cluster Resource Mount
WebAccess Agent domain is located.

16.2.5 Planning the MTA Installation

Follow the instructions in
then return to this point. After you follow the instructions, you have a filled-out
Worksheet
IMPORTANT: Do not install the Linux MTA until you are instructed to do so in
"Setting Up the WebAccess Agent in a Linux Cluster," on page

16.2.6 Planning the WebAccess Agent Installation

Aside from the cluster-specific issues discussed in the preceding sections, the considerations
involved in planning to install the WebAccess Agent are the same in a clustering environment as for
any other environment. Review the installation instructions in
Agent" in "Installing GroupWise
"GroupWise WebAccess Installation
as you install the WebAccess Agent in your cluster.
IMPORTANT: Do not install the WebAccess Agent software until you are instructed to do so in
Setting Up the WebAccess Agent in a Linux

16.2.7 Planning the WebAccess Application Installation

The WebAccess Application must be installed on a non-clustered Web server. For WebAccess
Application planning information, see
Applications'
Guide.
16.3 Setting Up the WebAccess Agent in a Linux
Cluster
You should already have reviewed
Cluster," on page 187
page 204. You are now ready to complete the following tasks to set up the WebAccess Agent in a
clustering environment:
Section 16.3.1, "Creating a Domain for the WebAccess Agent," on page 191
Section 16.3.2, "Installing the MTA for the WebAccess Agent Domain," on page 191
Section 16.3.3, "Installing and Configuring the WebAccess Agent in a Cluster," on page 191
Section 16.3.4, "Installing and Configuring the WebAccess Application in a Cluster," on
page 201
190 GroupWise 7 Interoperability Guide
Section 13.6.4, "Planning the Linux Agent Installation," on page
to use when you install the MTA.
WebAccess" in the
Configuration" in "Installing GroupWise
Section 16.2, "Planning the WebAccess Agent in a Linux
and filled out
Point, list the mount point for the GroupWise partition where the
GroupWise 7 Installation
Worksheet" to record the planning information you will need
Cluster.
"Determining the WebAccess and WebPublisher
WebAccess" in the
Section 16.6, "WebAccess Agent Clustering Worksheet," on
Agent Clustering
Section 16.3,
190.
"Installing the Linux WebAccess
Guide. Use the
GroupWise 7 Installation
139,