Deciding Where To Install The Webaccess Agent And Its Mta; Planning The Mta Installation; Planning The Webaccess Installation - Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual

44.2.5 Deciding Where to Install the WebAccess Agent and Its
MTA
As with the MTA and the POA, you can choose to install the WebAccess Agent and its MTA to each
node in the cluster or to the shared disk of the WebAccess resource group. For a discussion of these
alternatives, see
issues in the context of planning MTA and POA installations.
WEBACCESS CLUSTERING WORKSHEET
Under Item 3: MTA Installation Location
whether you will install the WebAccess Agent and its MTA to each node in the cluster or to the shared
disk of the WebAccess resource group. Also specify where the MTA startup file will be stored.

44.2.6 Planning the MTA Installation

Follow the instructions in
After you follow the instructions, you will have a filled-out Windows Agent Worksheet to use when
you install the MTA.
IMPORTANT: Do not install the Windows MTA until you are instructed to do so in
"Setting Up WebAccess in a Cluster," on page

44.2.7 Planning the WebAccess Installation

Aside from the cluster-specific issues discussed in the preceding sections, the considerations
involved in planning to install WebAccess are the same in a clustering environment as for any other
environment. Review
WebAccess Installation
Installation
and the WebAccess Application in two separate steps:
"Planning the WebAccess Agent Installation" on page 426
"Planning the WebAccess Application Installation" on page 427
IMPORTANT: Do not install the WebAccess software until you are instructed to do so in
Section 44.3, "Setting Up WebAccess in a Cluster," on page
Planning the WebAccess Agent Installation
For the WebAccess Agent, fill out items 2 through 12 on the GroupWise WebAccess Installation
Worksheet, taking into account the following cluster-specific issues:
426 GroupWise 7 Interoperability Guide
"Deciding Where to Install the Agent Software" on page
"Planning the MTA Installation" on page
"Planning GroupWise
Worksheet" in
Guide. When you set up WebAccess in a cluster, you will install the WebAccess Agent
and Item 5: WebAccess Agent Installation
427.
WebAccess", then print and fill out the
"Installing GroupWise WebAccess" in the
427.
393, which describes the
Location, mark
426, then return to this point.
Section 44.3,
"GroupWise
GroupWise 7