Streamlining Authentication To Teaming Or Conferencing; Using Ichain For Authenticating To Teaming Or Conferencing; Meeting Ichain Requirements; Setting Up An Ichain Web Server Accelerator For Teaming Or Conferencing - Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual

Streamlining Authentication to
2 5
Teaming or Conferencing
You can implement single sign-on for use with Teaming or Conferencing.
Section 25.1, "Using iChain for Authenticating to Teaming or Conferencing," on page 265
Section 25.2, "Using Novell Access Manager for Authenticating to Teaming or Conferencing,"
on page 267
25.1 Using iChain for Authenticating to Teaming
or Conferencing
®
You can use Novell iChain
Conferencing. The instructions in this section assume that you have an understanding of iChain, as
described on the Novell iChain 2.3 Documentation Web site (http://www.novell.com/
documentation/ichain23)
There are many ways to configure iChain. This section illustrates one possible way to configure
iChain to support Teaming or Conferencing. Before following the steps in this section, you must
have Teaming or Conferencing, as well as iChain, installed, configured, and running.
Section 25.1.1, "Meeting iChain Requirements," on page 265
Section 25.1.2, "Setting Up an iChain Web Server Accelerator for Teaming or Conferencing,"
on page 265
Section 25.1.3, "Adding the New Web Server Accelerator to the iChain Server Object in
ConsoleOne," on page 266
Section 25.1.4, "Using iChain for Authentication," on page 267

25.1.1 Meeting iChain Requirements

In order to get the best performance and reliability from iChain with Teaming and Conferencing,
you must install iChain 2.3 Support Pack 5 Release 4 version 2.3.410. This software is available on
the iChain Patches tab on the
installation instructions that are provided with the patch.
25.1.2 Setting Up an iChain Web Server Accelerator for
Teaming or Conferencing
1 Access the iChain Proxy Administration Tool at the following URL:
http://proxy_server_address:port/appliance/config.html
2 Click Configure, then click Insert to create a new Web server accelerator for Teaming or
Conferencing
The new accelerator is enabled by default.
3 In the Name field, provide a unique and descriptive name for the new accelerator.
®
to eliminate a dual user login into your network and into Teaming or
and that you have iChain set up and running on your system.
Novell Downloads Web site

Streamlining Authentication to Teaming or Conferencing

(http://download.novell.com). Follow the
25
265