Creating Ssl Certificates; Enabling Or Disabling The Synchronization Of E-Mail Settings - Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual

Do the follow to upgrade each BCC driver set you created in
on page 77
14a In iManager, click Identity Manager, then click Identity Manager Overview.
14b Search for the driver sets that you have added, then click the driver set link to bring up the
Driver Set Overview.
14c Click the red Cluster Sync icon, and you should be prompted to upgrade the driver.

9.4 Creating SSL Certificates

If SSL certificates are not present or have not been created, Identity Manager drivers might not start
or function properly. We recommend using SSL certificates for encryption and secure information
transfer between clusters and the Identity Manager vault. Create separate certificates for the Cluster
Resource Synchronization driver and the User Synchronization driver.
IMPORTANT: You should create or use a different certificate than the default (dummy) certificate
(BCC Cluster Sync KMO) that is included with BCC.
To create an SSL certificate:
1 Start your Internet browser and enter the URL for iManager.
The URL is http://server_ip_address/nps/iManager.html. Replace server_ip_address with the
IP address or DNS name of the server that has iManager and the Identity Manager
preconfigured templates for iManager installed.
2 Specify your username and password, specify the tree where you want to log in, then click
Login.
3 In Roles and Tasks, click Identity Manager Overview, then click NDS-to-NDS Driver
Certificates.
4 Specify the requested driver information for this cluster, then click Next.
You must specify the driver name (including the context) you supplied in
for this cluster. Use the following format when specifying the driver name:
DriverName.DriverSet.OrganizationalUnit.OrganizationName
Ensure that there are no spaces (beginning or end) in the specified context, and do not use the
cn=DriverName.ou=OrganizationalUnitName.o=OrganizationName
5 Specify the requested driver information for the driver in the other cluster.
Use the same format specified in
6 Click Next, then click Finish.
9.5 Enabling or Disabling the Synchronization of
e-Mail Settings
You can modify the Identity Manager driver filter to enable or disable the synchronization of e-mail
settings. For example, you might need to prevent e-mail settings from being synchronized between
two peer clusters when you are debugging your BCC solution to isolate problems in a given peer
cluster.
80 BCC 1.2.1: Administration Guide for OES 2 SP2 Linux
Step 4.
"Configuring the BCC Drivers"
Step 11 on page 78
format.