Scaling The Inputs - CARLO GAVAZZI UDM 35 - PROGRAMMING Programming Manual

UDM 35/40 PANEL METER USER MANUAL

Scaling the Inputs

When
electrical input range, the decimal point position and display span as
follows:
Electrical Input Range (HiE and LoE)
Allows the operator to define an electrical input range different from the
standard range setup at the "inP" programming step. As example, a UDM
with a full-scale 20mA (19.99mA) setting, it is possible to select an
electrical input range from 4.00mA (Lo.E) to 19.99mA (Hi.E) by
proceeding as follows:
When
Using the
choose the desired value. Using the
digits have proper values. Press
"HiE" will now appear.
Using the same procedure as above, toggle through the digits using the
key and choose the desired values with the
confirm and advance to the next parameter, Decimal Point Position.
is displayed, access is available for configuring the
is displayed, press
key, toggle to select a digit, then press the
. "LoE" will appear.
key, repeat as necessary until all
.
or key. Press
or key to
to
8