Dialogic IMG 1004 Installation And Setup Manual page 53

Dialogic integrated media gateways installation and setup guide
Hide thumbs Also See for IMG 1004:
Table of Contents

Advertisement

Installing IMG ClientView Software
[excelsw@img2-dtran ftpBuilds]$ su
Password:
[root@img2-dtran ftpBuilds]# ./IMGUserInterface_10.3.3.229.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Preparing CONSOLE Mode Installation...
=================================================================
==============
ClientView
-------------------------------------------------------------------------------
=================================================================
==============
Introduction
------------
InstallAnywhere will guide you through the installation of Dialogic ClientView
10.3.3.229.
It is strongly recommended that you quit all programs before continuing with
this installation.
Respond to each prompt to proceed to the next step in the installation. If you
want to change something on a previous step, type 'back'.
You may cancel this installation at any time by typing 'quit'.
PRESS <ENTER> TO CONTINUE:
=================================================================
==============
Pre-Installation Summary
------------------------
Please Review the Following Before Continuing:
Product Name:
ClientView
Install Folder:
/opt/cantata
Link Folder:
/tmp/install.dir.7368/Do_Not_Install
Product Components:
ClientView
Disk Space Information (for Installation Target):
Required: 178,030,774 bytes
Available: 1,418,543,104 bytes
PRESS <ENTER> TO CONTINUE:
=================================================================
==============
Installing...
-------------
[==================|==================|==================|=========
=========]
[------------------|------------------|------------------|------------------]
=================================================================
==============
Please Review
-------------
Congratulations. ClientView has been successfully installed to:
/opt/cantata
**********************************************************************
This installation has set some environment variables in /etc/profile. These
variables are not set in this window or any other windows opened prior to
IMG 1010 - Software Installation and Setup
(created with InstallAnywhere by Macrovision)
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Img 1010

Table of Contents