Dialogic IMG 1004 Installation And Setup Manual page 51

6. Once finished an icon for ClientView, AdminView, StopGCEMS, and StartGCEMS
is automatically created and placed on the Linux Red Hat desktop.
7. Log out of the Super User mode by entering the quit command and become
excelsw user again. This will create an entry in the /etc/profile to set the
SK_LIB_DIR directory.
8. To verify that the SK_LIB_DIR path is correct, go to the /etc directory and enter
the more command to the profile file. See Command Below.
[excelsw@img1010 etc]$ more profile
Verify the following depending on the software version being used:
SK_LIB_DIR=/opt/cantata/IMG/GateControlEMS and
LD_LIBRARY_PATH:/opt/cantata/IMG/GateControlEMS/lib (Software 10.3.3 - 10.5.0)
or
SK_LIB_DIR=/opt/dialogic/IMG/GateControlEMS and
LD_LIBRARY_PATH:/opt/dialogic/IMG/GateControlEMS/lib (Software 10.5.1
9. Use FTP to transfer your IMG license to the license folder. Login as user excelsw
and put the license file <chassis serial number>-<date>.cfg into one the
following directory:
/opt/cantata/common/license (Software 10.3.x to 10.5.0)
or
/opt/dialogic/common/license (Software 10.5.1
10. See the link "Folders and Files Created During Installation" This will explain the
directory structure and explain what each folder is created for.
11. Once software is installed then the services such as ftp, dhcpd, nfs, and ntpd will
need to be configured and started. See Configuring Linux Services for
information on how to accomplish this
IMG 1010 - Software Installation and Setup
)
+
)
+
43