Dialogic IMG 1004 Installation And Setup Manual page 148

Installation and Setup
Calculating the BootFlag:
The boot flag is calculated by adding values above based on desired system attributes.
TDM
If system is used for T1 only --> Add 0
If system is used for E1 only --> Add 2
Boot
If booting from an FTP Server --> Add 0
If booting from an SD Card --> Add 32
Example: Booting from SD Card + E1 system
Booting from SDCard = 32
Configuring E1 System = 2
Using Profile 6 = 16
BootFlag for this system is 32 + 2 + 16 = 50
For a complete List of codecs that are currently supported and a short description of each
codec, click on the Supported Codecs link
140