Adjusting The View/Brightness Of The Lcd; Setting The System Clock; Turning The Door Chime On And Off; Walktest - GE NX-148E User Manual

Adjusting the view/brightness of the LCD

Step 1 Enter [r][9][1]. The LCD Screen will prompt for a code.
Step 2 Enter [master code]. The LCD will now prompt you to raise or lower the view.
Step 3 Using the [r][9][1]scroll keys to the right of the LCD, you can raise the text or lower the text.
Step 4 To advance to the Brightness option, press [r]. The LCD will prompt you to brighten or dim
the LCD lighting.
Step 5 Use the [ ][ ] scroll keys again to adjust to desired brightness.
Step 6 When completed, exit by pressing [r].

Setting the system clock

Step 1 Enter [r][9][7]. The LCD Screen will prompt for a code.
Step 2 Enter [master code]. The time and date will be displayed with the current hour flashing.
Step 3 Use the [ ][ ] scroll keys to select the proper hour.
Step 4 Enter the [*] key to move to the minutes, day of week, date, month, and year.
Step 5 Repeat Steps 3 and 4 until the entire time and date are set.

Turning the door chime ON and OFF

The door chime feature must be enabled by your installer. The door chime is turned on or off by pressing the
[CHIME] key. If the chime is on, the chime light will be illuminated. If the chime is off, the chime light will be
off. Each press of the [CHIME] key will toggle the chime feature on/off and produce a momentary ding-dong
sound.

Walktest

The possibility exists to do a walktest of the system. This means that all zones, activated during the walktest
mode, will activate the "ding-dong" chime and will be filed into the memory of the control panel.
In this way the user can test his system completely :
Step 1 Enter [r][Chime] : the LCD screen will prompt you for a "master code".
Step 2 Enter a [Mastercode] : the screen will display the message "walktest mode".
Step 3 Activate all sensors to be tested. Each activation of a sensor is confirmed with a "ding-dong"
sound. The zonetexts of the sensors who have reacted, are displayed one by one on the
screen.
Step 4 Enter a [Mastercode] to exit the walktest mode.
NX-148E User manual Page 19
g
GE Security
04/10/04