Setting The Default File System; Displaying Information About Files On A File System - Cisco CISCO1401 - 1401 Router - EN Software Manual

Chapter 17 Managing Firmware and Configurations
Table 17-1 show file systems Field Descriptions (continued)
Field Value
Type Type of file system.
flash—The file system is for a Flash memory device.
network—The file system is for a network device.
nvram—The file system is for a nonvolatile RAM (NVRAM) device.
opaque—The file system is a locally generated pseudo file system (for example, the system) or a download
interface, such as brimux.
unknown—The file system is an unknown type.
Flags Permission for file system.
ro—read-only.
rw—read/write.
wo—write-only.
Prefixes Alias for file system.
flash:—Flash file system.
ftp:—File Transfer Protocol network server. Used to transfer files to or from the network device.
nvram:—Non-volatile RAM memory (NVRAM).
null:—Null destination for copies. You can copy a remote file to null to determine its size.
rcp:—Remote Copy Protocol (RCP) network server.
system:—Contains the system memory, including the running configuration.
tftp:—Trivial File Transfer Protocol (TFTP) network server.
zflash:—Read-only file decompression file system, which mirrors the contents of the Flash file system.

Setting the Default File System

You can specify the file system or directory that the system uses as the default file system by using the
cd filesystem: privileged EXEC command. You can set the default file system to omit the filesystem:
argument from related commands. For example, for all privileged EXEC commands that have the
optional filesystem: argument, the system uses the file system specified by the cd command.
By default, the default file system is flash:.
You can display the current default file system as specified by the cd command by using the pwd
privileged EXEC command.

Displaying Information About Files on a File System

You can view a list of the contents of a file system before manipulating its contents. For example, before
copying a new configuration file to Flash memory, you might want to verify that the file system does not
already contain a configuration file with the same name. Similarly, before copying a Flash configuration
file to another location, you might want to verify its filename for use in another command.
OL-4059-01
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
Working with the Flash File System
17-3