Displaying Spanning-Tree Status - Cisco CISCO1401 - 1401 Router - EN Software Manual

Displaying Spanning-Tree Status

Displaying Spanning-Tree Status
To display the spanning-tree status, use one or more of the privileged EXEC commands in
Table 8-3 Commands for Displaying Spanning-Tree Status
Command
show spanning-tree
show spanning-tree blocked-ports
show spanning-tree bridge
show spanning-tree active
show spanning-tree root
show spanning-tree interface interface-id
show spanning-tree summary [totals]
For information about other keywords for the show spanning-tree privileged EXEC command, refer to
the Cisco Aironet IOS Command Reference for Cisco Aironet Access Points and Bridges for this release.
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
8-14
Purpose
Displays information on your network's spanning tree.
Displays a list of blocked ports on this bridge.
Displays status and configuration of this bridge.
Displays spanning-tree information on active interfaces only.
Displays a detailed summary of information on the spanning-tree root.
Displays spanning-tree information for the specified interface.
Displays a summary of port states or displays the total lines of the STP state
section.
Chapter 8 Configuring Spanning Tree Protocol
Table 8-3:
OL-4059-01