Table of Contents
Advertisement
Configuring QoS
This chapter describes how to configure quality of service (QoS) on your bridge. With this feature, you
can provide preferential treatment to certain traffic at the expense of others. Without QoS, the bridge
offers best-effort service to each packet, regardless of the packet contents or size. It sends the packets
without any assurance of reliability, delay bounds, or throughput.
For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Note
Command Reference for Cisco Aironet Access Points and Bridges for this release.
This chapter consists of these sections:
Understanding QoS for Wireless LANs, page 13-2
•
•
Configuring QoS, page 13-3
QoS Configuration Examples, page 13-10
•
OL-4059-01
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
C H A P T E R
13
13-1
Advertisement
Table of Contents
