Configuring Spanning Tree Protocol
This chapter descibes how to configure Spanning Tree Protocol (STP) on your bridge. This chapter
contains these sections:
Understanding Spanning Tree Protocol, page 8-2
•
Configuring STP Features, page 8-8
•
Displaying Spanning-Tree Status, page 8-14
•
For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Note
Command Reference for Access Points and Bridges for this release.
OL-4059-01
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
C H A P T E R
8
8-1