Configuring Qos Using The Web-Browser Interface - Cisco CISCO1401 - 1401 Router - EN Software Manual

Configuring QoS

Configuring QoS Using the Web-Browser Interface

This section describes configuring QoS using the web-browser interface.
For a list of IOS commands for configuring QoS using the CLI, consult the Cisco IOS Command
Reference for Cisco Aironet Access Points and Bridges. Follow these steps to browse to the command
reference:
1.
2.
Follow these steps to configure QoS:
If you use VLANs on your wireless LAN, make sure the necessary VLAN is configured on your bridge
Step 1
before configuring QoS.
Step 2 Click Services in the task menu on the left side of any page in the web-browser interface. When the list
of Services expands, click QoS. The QoS Policies page appears.
page.
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
13-4
Click this link to browse to the Cisco Aironet documentation home page:
http://www.cisco.com/cisco/web/psa/default.html
Follow this path to the product, document, and chapter:
Aironet 1400 Series Wireless LAN Products > Cisco Aironet 1400 Series Bridges >
Cisco Aironet 1400 Series Bridge Command Reference
Chapter 13 Configuring QoS
Figure 13-1 shows the QoS Policies
OL-4059-01