Adobe FRAMEMAKER 6.0 Manual page 307

Example:
Note:
End of clipping rectangle (0x8B)
Specification by data type:
Description of data:
Size of data in bytes:
Example:
FrameVector graphic imported within this graphic (0x8C)
Specification by data type:
Description of data:
Size of data in bytes:
Example:
Note:
8A 00000010 00670000 004F0000 00130000 003C0000
for a clipping rectangle with the following specifications:
x position = 103 points (0067)
y position = 79 points (004F)
width = 19 points (0013)
height = 60 points (003C)
Clipping rectangles are unique to the FrameVector format. All objects within a clipping rect-
angle are drawn to the boundaries of the rectangle. If an object extends beyond this region,
the portion that passes the rectangle boundary is not drawn.
The specification of the start of a clipping rectangle begins with op code 8A and ends with op
code 8B. All objects within the clipping rectangle must be specified between these two op
codes.
N/A
None
0
8B 00000000
Rectangle, byte, vector data
Position and size of the bounding rectangle in points (rectangle)
Is the object flipped left/right? (byte — 0:no, 1:yes)
FrameVector data (vector data)
Variable
8C 00000046 00670000 004F0000 00130000 003C0000 00
...(FrameVector data)...
for a FrameVector graphic with the following specifications:
x position = 103 points (0067)
y position = 79 points (004F)
width = 19 points (0013)
height = 60 points (003C)
flipped left/right = no
The vector graphic is scaled to the size of the bounding rectangle.
ADOBE FRAMEMAKER 6.0 307
FrameVector Facet Format