IBM INTELLISTATION E PRO 6204 User Manual page 86

•
Installing memory modules
Adding memory to your computer is an easy way to make programs run faster. You
can increase the amount of memory in your computer by installing memory modules.
Your IntelliStation E Pro computer uses industry-standard dual inline memory
modules (DIMMs).
Do the following to install a DIMM:
Attention: When handling static-sensitive devices, take precautions to avoid
damage from static electricity. For details on handling these devices, see "Handling
static-sensitive devices" on page 37.
1. Review the safety precautions listed in the "Safety information" on page vii.
2. Turn off the computer and all attached devices. Disconnect all external cables
3. Remove the support bracket. See "Removing the support bracket" on page 59.
4. Touch the static-protective package containing the DIMM to any unpainted metal
5. Open the retaining clips and, if necessary, remove any existing DIMM.
6. Gently open the retaining clip on each end of the DIMM slot. Turn the DIMM so
70
IBM® IntelliStation® E Pro: User's Guide
If you have only one IDE device on a cable, it must be set as a primary device.
and power cords; then remove the cover. See "Removing the side cover" on page
58 for details.
surface on the computer. Then remove the new DIMM from the package.
that the pins align correctly with the connector.