IBM INTELLISTATION E PRO 6204 User Manual page 117

Table 15. NDIS (Windows 2000 or Windows XP) Event Viewer messages for the Ethernet controller.
Error code
(hex)
0x02 Explanation: Bad node address (multicast address).
Action: Make sure the locally administered address is valid, if one is specified. The address can not
be a multicast address.
0x03 Explanation: Failed self-test.
Action: Make sure a cable is attached to the Ethernet connector. If the problem persists, call for
service.
0x0D Explanation: Could not allocate enough memory for transmit queues.
Action:
• If you have Windows 2000, do the following:
1. From the Windows 2000 desktop, click Start→Control Panel→Networks→Adapters.
2. Select your IBM Ethernet adapter from the list.
3. Click Properties→Advanced.
4. Lower the resource values that apply to the transmit queue.
• If you have Windows XP Professional, do the following:
1. Click Start→Control Panel→Network Connections→Local Area Connection.
2. Select your IBM Ethernet adapter from the list.
3. Click Properties→Advanced.
4. Lower the resource values that apply to the transmit queue.
0x0E Explanation: Could not allocate enough memory for receive queue.
Action:
• If you have Windows 2000, do the following:
1. From the Windows 2000 desktop, click Start→Control Panel→Networks→Adapters.
2. Select your IBM Ethernet adapter from the list.
3. Click Properties→Advanced.
4. Lower the resource values that apply to the transmit queue.
• If you have Windows XP Professional, do the following:
1. Click Start→Control Panel→Network Connections→Local Area Connection.
2. Select your IBM Ethernet adapter from the list.
3. Click Properties→Advanced.
4. Lower the resource values that apply to the transmit queue.
Description
Chapter 6. Solving problems
101