IBM INTELLISTATION E PRO 6204 User Manual page 68

Installing a security U-bolt
To help prevent theft, you can add a security U-bolt and cable to your computer.
Do the following to install the U-bolt:
1. Review the safety precautions listed in "Safety information" on page vii.
2. Turn off the computer and all attached devices. Disconnect all external cables
3. Use a screwdriver to remove the two metal knockouts.
4. Insert the U-bolt through the rear panel; then attach and tighten the nuts.
5. Thread the cable through the U-bolt and around an object that is not part of or
6. Reconnect the external cables and power cords, and turn on the attached
52
IBM® IntelliStation® E Pro: User's Guide
and power cords; then remove the cover. See "Removing the cover" on page 41
or "Removing the side cover" on page 58 for details.
permanently secured to the building structure or foundation, and from which the
cable cannot be removed. Fasten the cable ends together with a lock. After you
add the security cable, make sure that it does not interfere with other cables
connected to the computer.
devices, then the computer.