IBM INTELLISTATION E PRO 6204 User Manual page 118

Table 15. NDIS (Windows 2000 or Windows XP) Event Viewer messages for the Ethernet controller.
Error code
(hex)
0x0F Explanation: Could not allocate enough memory for other structures.
Action:
• If you have Windows 2000, do the following:
1. From the Windows 2000 desktop, click Start→Control Panel→Networks→Adapters.
2. Select your IBM Ethernet adapter from the list.
3. Click Properties→Advanced.
4. Lower the resource values that apply to the transmit queue.
• If you have Windows XP Professional, do the following:
1. Click Start→Control Panel→Network Connections→Local Area Connection.
2. Select your IBM Ethernet adapter from the list.
3. Click Properties→Advanced.
4. Lower the resource values that apply to the transmit queue.
0x10 Explanation: Did not find any Ethernet controllers.
Action: Contact your network administrator.
0x11 Explanation: Multiple Ethernet controllers found, but none matched the required ID.
Action: Contact your network administrator.
0x13 Explanation: Did not find any Ethernet controllers that matched the required subven/subdev.
Action: Contact your network administrator.
0x16 Explanation: Single adapter found, but multiple instances tried to load.
Action: Contact your network administrator.
0x17 Explanation: Slot parameter not specified in the registry.
Action: Call for service.
All other 4- Action: Call for service.
character
hexadecimal
codes
Ethernet teaming messages
This section displays the messages associated with Ethernet teaming.
Table 16. NDIS (Windows 2000 or Windows XP) driver teaming messages for the Ethernet controller.
Event ID
01 Error
02 Error
102
IBM® IntelliStation® E Pro: User's Guide
Type
Explanation:
is an invalid configuration.
Action: Reconfigure the adapter team by double-clicking the PROSet
icon in the control panel.
Explanation:
Action: Free some memory resources and restart.
Description
Description
Team name and physical adapter name are the same. This
Unable to allocate required resources.