Ip Routing Group - McDATA StorageWorks 64 - SAN Director Switch Manual

E/os snmp
Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:
Table of Contents

Advertisement

ipAdEntReasmMaxSize
Type
Access
Description

IP Routing group

ipRouteDest
Type
Access
Description
ipRouteIfIndex
Type
Access
Description
ipRouteMetric1
Type
Access
Description
INTEGER (0..65535)
R
The size of the largest IP datagram which this entity can re-assemble
from incoming IP fragmented datagrams received on this interface.
The IP routing group contains an entry for each route presently
known to this entity.
IpAddress
RW
The destination IP address of this route. An entry with a value of
0.0.0.0 is considered a default route. Multiple routes to a single
destination can appear in the table, but access to such multiple entries
is dependent on the table-access mechanisms defined by the network
management protocol in use.
INTEGER
RW
The index value which uniquely identifies the local interface through
which the next hop of this route should be reached. The interface
identified by a particular value of this index is the same interface as
identified by the same value of ifIndex.
INTEGER
RW
The primary routing metric for this route. The semantics of this
metric are determined by the routing-protocol specified in the route's
McDATA SNMP Support
MIB Definitions: MIB-II
2
2-37

Advertisement

Table of Contents
loading

Table of Contents