McDATA StorageWorks 64 - SAN Director Switch Manual page 309

Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:

Table of Contents

connUnitPortStatCountLossofSignal

connUnitPortStatCountLossofSynchronization

connUnitPortStatCountInvalidOrderedSets

Count of primitive sequence protocol errors detected at this port.

This count is part of the Link Error Status Block (LESB). (FC-PH 29.8).

Note, this is a Fibre Channel only stat.

::= { connUnitPortStatEntry 42 }

OCTET STRING (SIZE (8))

Count of instances of signal loss detected at port. This count is part of

the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre

Channel only stat.

::= { connUnitPortStatEntry 43 }

OCTET STRING (SIZE (8))

Count of instances of synchronization loss detected at port. This

count is part of the Link Error Status Block (LESB). (FC-PH 29.8).

Note, this is a Fibre Channel only stat.

::= { connUnitPortStatEntry 44 }

OCTET STRING (SIZE (8))

Count of invalid ordered sets received at port. This count is part of

the Link Error Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre

Channel only stat.

::= { connUnitPortStatEntry 45 }

FC Management MIB