Table of Contents
Advertisement
Access
Description
FcConnUnitPortStatCountTxObjects
Type
Product Mapping
Access
Description
FcConnUnitPortStatCountRxObjects
Type
Product Mapping
Access
Description
FcConnUnitPortStatCountTxElements
Type
Product Mapping
Access
synchronization losses.
(Only supports low 32-bits of counter, high 32-bits are set to zero).
R
A count of the errors that have occurred on this port.
Counter64
stTxFrames (64-bit counter).
R
The number of frames/packets/Ios/etc that have been transmitted
by this port.
NOTE: A Fibre Channel frame starts with SOF and ends with an EOF. FC
loop devices should not count frames passed through. This value represents
the sum total for all other Tx objects.
Counter64
stRxFrames (64-bit counter).
R
The number of frames/packets/Ios/etc that have been received by
this port.
NOTE: A Fibre Channel frame starts with an SOF and ends with an EOF. FC
loop devices should not count frames passed through. This value represents
the sum total for all other Rx objects.
Counter64
stTxOctets (64-bit counter).
R
McDATA SNMP Support
Fibre Alliance MIB
2-127
2
Advertisement
Table of Contents
