McDATA StorageWorks 64 - SAN Director Switch Manual page 256

FC Management MIB
B
connUnitUpTime
connUnitUrl
connUnitDomainId
E/OS SNMP Support Manual
B-12
Status
mandatory
Description
The serial number for this connectivity unit.
Sequence
::= { connUnitEntry 8 }
Syntax
TimeTicks
Access
read-only
Status
mandatory
Description
The number of centiseconds since the last unit initialization.
Sequence
::= { connUnitEntry 9 }
Syntax
DisplayString
Access
read-write
Status
mandatory
Description
URL to launch a management application, if applicable. Otherwise
empty string. In a standalone unit, this would be the same as the
top-level URL. This has the same definition as systemURL for
keywords. If write is not supported, then return invalid. This value
will be retained across boots.
Sequence
::= { connUnitEntry 10 }
Syntax
OCTET STRING (SIZE(3))
Access
read-only
Status
mandatory
Description
24 bit Fibre Channel address ID of this connectivity unit, right
justified with leading zero's if required. This should be set to the
Fibre Channel address ID or if it is a switch it would be set to the
Domain Controller address. If this value is not applicable, return all
bits set to one.
Sequence
::= { connUnitEntry 11 }