Enterprise-Specific Invalid Attachment Trap; Enterprise-Specific Threshold Alert Trap; Enterprise-Specific Fru Traps - McDATA StorageWorks 64 - SAN Director Switch Manual

E/os snmp
Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:
Table of Contents

Advertisement

McDATA SNMP Support
2

Enterprise-specific Invalid Attachment Trap

Binding
OID
1
1.3.6.1.4.1.289.2.1.1.2.4.1.1.4.port_number+1
fcEosPortAttachedWWN.port_number+1

Enterprise-specific Threshold Alert Trap

Binding
OID
1
1.3.6.1.4.1.289.2.1.1.2.3.1.1.1.port_number+1
fcEosPortIndex.port_number+1
2
1.3.6.1.4.1.289.2.1.1.2.6.1.1.1.threshold_number
fcEosTAIndex.threshold_number

Enterprise-specific FRU Traps

E/OS SNMP Support Manual
2-8
This trap is sent when an invalid attachment occurs (a device is
attached, with a WWN specifically disallowed by port binding).
There is 1 variable binding.
This trap is sent when port traffic exceeds a specified threshold.
There are 2 variable bindings.
The enterprise specific FRU traps (FRU removed, FRU active, FRU
backup, FRU update, FRU failed: type codes 5-9) share the same
bindings. There are 4 variable bindings for these traps:
Value
WWN of invalid attached device. See
definition for fcEosPortAttachedWWN.
Value
Port number of port with threshold alert.
The index of the threshold which was
triggered.

Advertisement

Table of Contents
loading

Table of Contents