Internet Protocol (Tcp/Ip) Properties Dialog Box - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

4. In the Components checked are used by this connection field,
double-click the Internet Protocol (TCP/IP) entry. The Internet
Protocol (TCP/IP) Properties dialog box displays
Figure 2-18

Internet Protocol (TCP/IP) Properties Dialog Box

5. The Use the following IP address radio button is enabled and the IP
address and Subnet mask fields display network information
configured while performing
Network
6. At the Default gateway field, enter the gateway address obtained
from the customer.
7. Select (enable) the Use the following DNS server addresses radio
button. At the Preferred DNS server field, enter the DNS server IP
address obtained from the customer, then click OK to apply the
changes and close the dialog box.
Task 7: Configure Server Password and
Addresses.
Installation Tasks
(Figure 2-18).
Installation Tasks
2-41
2