McDATA StorageWorks 64 - SAN Director Switch Manual page 255

Access
Status
Description
Sequence
connUnitStatus
Syntax
Access
Status
Description
Sequence
connUnitProduct
Syntax
Access
Status
Description
Sequence
connUnitSn
Syntax
Access
read-only
mandatory
Overall state of the connectivity unit.
::= { connUnitEntry 5 }
INTEGER {
unknown(1),
unused(2), cannot report status
ok(3), available for meaningful work
warning(4), something needs attention
failed(5) something has failed }
}
read-only
mandatory
Overall status of the connectivity unit. The goal of this object is to be
the single poll point to check the status of the connunit. If there is any
other component that has warning, then this should be set to
warning, etc.
::= { connUnitEntry 6 }
DisplayString (SIZE (0..79))
read-only
mandatory
The connectivity unit vendor's product model name.
::= { connUnitEntry 7 }
DisplayString (SIZE (0..79))
read-only
FC Management MIB
Connectivity unit group
B
B-11