McDATA StorageWorks 64 - SAN Director Switch Manual page 155

E/os snmp
Hide thumbs Also See for StorageWorks 64 - SAN Director Switch:
Table of Contents

Advertisement

Product Mapping
Access
Description
FcConnUnitPortStatCountNumberOfflineSequences
Type
Product Mapping
Access
Description
FcConnUnitPortStatCountLinkFailures
Type
Product Mapping
Access
Description
FcConnUnitPortStatCountInvalidCRC
Type
Product Mapping
Access
StOlssOut (Only supports low 32 bits of counter, high 32 bits are set
to zero).
R
Number of Offline Primitive OLS transmitted by this port.
NOTE: This is a Fibre Channel only statistic.
Counter64
stOlssIn + stOlssOut (Only supports low 32 bits of counter, high 32
bits are set to zero).
R
Number of Offline Primitive sequence received at this port.
NOTE: This is a Fibre Channel only statistic.
Counter64
stLinkFailures (Only supports low 32 bits of counter, high 32 bits are
set to zero).
R
Number of link failures. This count is part of the Link Error Status
Block (LESB). (FC-PH 29.8).
NOTE: This is a Fibre Channel only statistic.
Counter64
stInvalidCrcs (Only supports low 32 bits of counter, high 32 bits are
set to zero).
R
McDATA SNMP Support
Fibre Alliance MIB
2-137
2

Advertisement

Table of Contents
loading

Related Products for McDATA StorageWorks 64 - SAN Director Switch

Table of Contents