Table of Contents
Advertisement
Access
Description
FcFxPortPhysOperStatus
Type
Provided By
Access
Description
FcFxPortPhysLastChange
Type
Provided By
Access
R/W
The desired state of the Fx_Port. A management station may place
the Fx_Port in a desired state by setting this object accordingly. The
testing(3) state indicates that no operational frames can be passed.
When a Fabric Element initializes, all Fx_Port start with
fcFxPortPhysAdminStatus
As the result of either explicit management action or per
configuration information accessible by the Fabric Element,
fcFxPortPhysAdminStatus
testing(3) states, or remains in the offline state. The values are defined
as follow: online(1) – place port online, offline(2) – take port offline,
testing (3).
If the port cannot be set to testing because it is inactive or in a failed
state, the return value will be resource_unavailable(13).
INTEGER
FPM, SNMP
R
The current operational status of the Fx_Port. The testing(3) status
indicates that no operational frames can be passed. If
fcFxPortPhysAdminStatus
fcFxPortPhysOperStatus
If
fcFxPortPhysAdminStatus
fcFxPortPhysOperStatus
is ready to accept Fabric Login request from the attached NxPort; it
should proceed and remain in the link-failure(4) state if and only if
there is a fault that prevents it from going to the online(1) state.
The values are defined as online(1) – Login may proceed, offline(2) –
Login cannot proceed, testing(3) – port is under test, link-failure(4) –
failure after online/testing.
TimeTicks
SNMP
R
in the offline(2) state.
is then changed to either the online(1) or
is offline(2) then
should be offline(2).
is changed to online(1) then
should change to online(1) if the Fx_Port
Fabric Element Management MIB
McDATA SNMP Support
2-77
2
Advertisement
Table of Contents
