McDATA StorageWorks 64 - SAN Director Switch Manual page 290

FC Management MIB
B
connUnitLinkPortWwnY
connUnitLinkAgentAddressY
connUnitLinkAgentAddressTypeY
E/OS SNMP Support Manual
B-46
Description
The port number on the unit specified by connUnitLinkNodeIdY if
known, otherwise -1. If the value is nonnegative then it will be equal
to connUnitPortPhysicalNumber.
Sequence
::= { connUnitLinkEntry 7 }
Syntax
FcGlobalId
Access
read-only
Status
mandatory
Description
The port WWN on the unit specified by connUnitLinkNodeIdY if
known, otherwise 16 octets of binary 0.
Sequence
::= { connUnitLinkEntry 8 }
Syntax
OCTET STRING (SIZE(16))
Access
read-only
Status
mandatory
Description
The address of an FCMGMT MIB agent for the node identified by
connUnitLinkNodeIdY, if known; otherwise 16 octets of binary 0.
Sequence
::= { connUnitLinkEntry 9 }
Syntax
INTEGER
Access
read-only
Status
mandatory
Description
If connUnitLinkAgentAddressY is nonzero, it is a protocol address.
ConnUnitLinkAgentAddressTypeY is the 'address family number'
assigned by IANA to identify the address format. (e.g., 1 is Ipv4, 2 is
Ipv6). If connUnitLinkAgentAddressY is all zeros, then this value is
ignored.
Sequence
::= { connUnitLinkEntry 10 }