Table of Contents
Advertisement
FC Management MIB
B
connUnitType
connUnitNumports
connUnitState
E/OS SNMP Support Manual
B-10
As a counterexample, if your agent runs in a host and the host has an
HBA, it is quite possible that agent, host, and HBA will all be distinct
connUnits, so the host and agent can not use the WWN of the HBA.
Another example:
If your hub has a built-in Ethernet port, it might be reasonable for the
hub to use its MAC address (prefixed with the appropriate NAA) as
its connUnitId. But if the Ethernet were a replaceable PCCard, the
hub should have an independent ID.
Sequence
::= { connUnitEntry 2 }
Syntax
FcUnitType
Access
read-only
Status
mandatory
Description
The type of this connectivity unit.
Sequence
::= { connUnitEntry 3 }
Syntax
INTEGER
Access
read-only
Status
mandatory
Description
Number of physical ports in the connectivity unit (internal/
embedded, external).
Sequence
::= { connUnitEntry 4 }
Syntax
INTEGER {
unknown(1),
online(2),
offline(3)
}
available for meaningful work
unavailable for meaningful work, for example in
self-test mode, configuration, etc.
Advertisement
Table of Contents
