Table of Contents
Advertisement
Description
Sequence
connUnitName
Syntax
Access
Status
Description
Sequence
connUnitInfo
Syntax
Access
Status
Description
Sequence
connUnitControl
Syntax
This is a unique id, persistent between boots, that can be used to
group a set of connUnits together into a module. The intended use
would be to create a connUnit with a connUnitType of 'module' to
represent a physical or logical group of connectivity units. Then the
value of the group would be set to the value of connUnitId for this
'container' connUnit. connUnitModuleId should be zeros if this
connUnit is not part of a module.
::= { connUnitEntry 19 }
DisplayString (SIZE(0..79))
read-write
mandatory
A display string containing a name for this connectivity unit. This
object value should be persistent between boots.
::= { connUnitEntry 20 }
DisplayString
read-write
mandatory
A display string containing information about this connectivity unit.
This object value should be persistent between boots.
::= { connUnitEntry 21 }
INTEGER {
unknown(1),
invalid(2),
resetConnUnitColdStart(3),
resetConnUnitWarmStart(4),
offlineConnUnit(5),
FC Management MIB
Connectivity unit group
B
B-15
Advertisement
Table of Contents
