E/Os Trap Summary Table - McDATA StorageWorks 64 - SAN Director Switch Manual

McDATA SNMP Support
2
E/OS Trap summary
table
Trap
Generic Authentication
Failure
Generic Link Up
Generic Warm Start
Generic Cold Start
ES port change
E/OS SNMP Support Manual
2-4
Error status—Indicates one of a number of errors and error types.
Only the response operation sets this field. Other operations set this
field to zero.
Error index—Associates an error with a particular object instance.
Only the response operation sets this field. Other operations set this
field to zero.
Variable bindings—Serves as the data field of the SNMPv2 PDU.
Each variable binding associates a particular object instance with its
current value (with the exception of Get and GetNext requests, for
which the value is ignored).
Get, GetNext, Inform, Response, Set, and Trap PDUs Contain the
Same Fields:
[PDU type | Request ID | Error status | Error index | Object/Value
1 | Object/Value 2]
For the SNMPv2 trap pdu, the first and second variable bindings
contain the uptime and the trap OID respectively. Following the
uptime and trap OID are all the variable bindings specified in the
MIB for that particular trap.
This table shows the different kinds of traps supported by the switch
E/OS firmware.
All E/OS traps are SNMPv1 format, regardless of MIB definition syntax.)
Severity Sent because
N/A SNMP request from
an invalid community
is received
N/A
N/A Software reset
N/A Power up
N/A A change in port
status
MIB Trap OID
RFC-1157
RFC-1157
RFC-1157
RFC-1157
FCEOS 1.3.6.1.4.1.289.1
E/OS EFCM
YES YES
YES NO
YES NO
YES NO
YES NO