Show Mvr - TP-Link TL-SL5428 User Manual

The following displays information about the interfaces attached to the MVR VLAN:
Console#show mvr interface
Port Type
------- --------
eth1/1 SOURCE
eth1/2 RECEIVER
eth1/5 RECEIVER
eth1/6 RECEIVER
eth1/7 RECEIVER
Console#
Table 4-35
Field
Port
Type
Status
Immediate Leave
The following shows information about the interfaces associated with multicast
groups assigned to the MVR VLAN:
Console#show mvr members
MVR Group IP
----------------
225.0.0.1
225.0.0.2
225.0.0.3
225.0.0.4
225.0.0.5
225.0.0.6
225.0.0.7
225.0.0.8
225.0.0.9
225.0.0.10
Console#
Table 4-36
Field Description
MVR Group IP Multicast groups assigned to the MVR VLAN.
Status Shows whether or not the there are active subscribers for this multicast group. Note that
this field will also display "INACTIVE" if MVR is globally disabled.
Members Shows the interfaces with subscribers for multicast services provided through the MVR
VLAN. Also shows if an interface has dynamically joined a multicast group (d), or if a
multicast group has been statically bound to the interface (s).
Status
-------------
ACTIVE/UP
ACTIVE/UP
INACTIVE/DOWN
INACTIVE/DOWN
INACTIVE/DOWN
show mvr interface - display description
Description
Shows interfaces attached to the MVR.
Shows the MVR port type.
Shows the MVR status and interface status. MVR status for source ports is
"ACTIVE" if MVR is globally enabled on the switch. MVR status for receiver
ports is "ACTIVE" only if there are subscribers receiving multicast traffic from
one of the MVR groups, or a multicast group has been statically assigned to
an interface.
Shows if immediate leave is enabled or disabled.
Status Members
-------- -------
ACTIVE eth1/1(d), eth1/2(s)
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
show mvr members - display description
Multicast VLAN Registration Commands
Immediate Leave
---------------
Disable
Disable
Disable
Disable
Disable
4
4-307