4
Command Line Interface
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for the web authentication feature to be active.
Example
Console(config-if)#web-auth
Console(config-if)#
show web-auth
This command displays global web authentication parameters.
Syntax
show web-auth
Default Setting
None
Command Mode
Privileged Exec
Example
Console#sh web-auth
Global Web-Auth Parameters
System Auth Control
Login Page URL
Login Fail Page URL
Login Success Page URL
Session Timeout
Quiet Period
Max Login Attempts
Console#
show web-auth interface
This command displays interface-specific web authentication parameters and
statistics.
Syntax
show web-auth interface interface
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28/52)
Default Setting
None
4-134
: Enabled
:
:
:
: 3600
: 60
: 3