Banner Configure Equipment-Info - TP-Link TL-SL5428 User Manual

Syntax
banner configure department dept-name
no banner configure company
dept-name - The name of the department. (Maximum length: 32
characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure
department command interprets spaces as data input boundaries. The use of
underscores ( _ ) or other unobtrusive non-letter characters is suggested for
situations where whitespace is necessary for clarity.
Example
Console(config)#banner configure department R&D
Console(config)#

banner configure equipment-info

This command allows the administrator to configure the equipment information
displayed in the banner. Use the no form to remove the equipment information from
the banner display.
Syntax
banner configure equipment-info manufacturer-id mfr-id floor floor-id row
row-id rack rack-id shelf-rack sr-id manufacturer mfr-name
no banner configure equipment-info [floor | manufacturer |
manufacturer-id | rack | row | shelf-rack]
mfr-id - The name of the device model number. (Maximum length: 32
characters)
floor-id - The floor number. (Maximum length: 32 characters)
row-id - The row number. (Maximum length: 32 characters)
rack-id - The rack number. (Maximum length: 32 characters)
sr-id - The shelf number in the rack. (Maximum length: 32 characters)
mfr-name - The name of the device manufacturer. (Maximum length: 32
characters)
Default Setting
None
Command Mode
Global Configuration
System Management Commands
4
4-31