TP-Link TL-SL5428 User Manual page 470

24-port 10/100 + 4-port gigabit managed switch
Hide thumbs Also See for TL-SL5428:
Table of Contents

Advertisement

Example
This example shows the configuration setting for port 24.
Console#show interfaces switchport ethernet 1/24
Broadcast threshold:
LACP status:
Ingress Rate Limit:
Egress Rate Limit:
VLAN membership mode:
Ingress rule:
Acceptable frame type:
Native VLAN:
Priority for untagged traffic: 0
Gvrp status:
Allowed Vlan:
Forbidden Vlan:
Private-VLAN mode:
Private-VLAN host-association: NONE
Private-VLAN mapping:
Console#
Field
Broadcast threshold
Lacp status
Ingress rate limit
Egress rate limit
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-245).
Ingress rule
Acceptable frame type
Native VLAN
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-264).
Gvrp status
Allowed Vlan
Forbidden Vlan
Private VLAN mode
Private VLAN
host-association
Private VLAN mapping
Enabled, 64 Kbits/second
Enabled
Disabled, 100000 Kbits per second
Disabled, 100000 Kbits per second
Hybrid
Enabled
All frames
1
Disabled
1(u),
NONE
NONE
Table 4-2
Interfaces Switchport Statistics
Description
Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-172).
Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-182).
Shows if ingress rate limiting is enabled, and the current rate limit. (page 4-179).
Shows if egress rate limiting is enabled, and the current rate limit. (page 4-179).
Shows if ingress filtering is enabled or disabled (page 4-246).
Note: Ingress filtering is always enabled.
Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-246).
Indicates the default Port VLAN ID (page 4-247).
Shows if GARP VLAN Registration Protocol is enabled or disabled (page 4-240).
Shows the VLANs this interface has joined, where "(u)" indicates untagged and
"(t)" indicates tagged (page 4-248).
Shows the VLANs this interface can not dynamically join via GVRP (page 4-249).
Shows the private VLAN mode as host, promiscuous, or none (4-257).
Shows the secondary (or community) VLAN with which this port is associated
(4-258).
Shows the primary VLAN mapping for a promiscuous port (4-259).
Interface Commands
4-175
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents