Web-Auth Re-Authenticate (Port); Web-Auth Re-Authenticate (Ip) - TP-Link TL-SL5428 User Manual

Command Mode
Privileged Exec
Example
Console#show web-auth interface eth 1/2
Web Auth Status
Host Summary
IP address Web-Auth-State Remaining-Session-Time
--------------- -------------- ----------------------
Console#

web-auth re-authenticate (Port)

This command ends all web authentication sessions connected to the port and
forces the users to re-authenticate.
Syntax
web-auth re-authenticate interface interface
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28/52)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#web-auth re-authenticate interface ethernet 1/2
Failed to reauth .
Console#

web-auth re-authenticate (IP)

This command ends the web authentication session associated with the designated
IP address and forces the user to re-authenticate.
Syntax
web-auth re-authenticate interface interface ip
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28/52)
• ip - IPv4 formatted IP address
: Enabled
Authentication Commands
4
4-135